How to Calibrate Simplisafe Smart Lock

The Simplisafe smart lock is a great device to keep your home secure. It boasts features such as keyless entry, remote locking, and more. But for it to be effective in providing security and convenience, you must calibrate it properly. Calibrating the lock will ensure it works correctly and seamlessly with your other Simplisafe devices.

How to Calibrate Simplisafe Smart Lock

Calibrating the Simplisafe Smart Lock is a simple process. After you’ve installed your lock, it’s important to follow the calibration steps to ensure it functions properly. Calibrating will also help improve battery life and make sure that all of your other Simplisafe products can communicate with each other. You can find step-by-step instructions on how to calibrate simplisafe smart lock in this blog article.

Causes of Calibrating Simplisafe Smart Lock

  • Poor Installation: If your Simplisafe Smart Lock was not installed according to manufacturer instructions, it could result in misalignment and other issues that prevent proper calibration.
  • Maladjusted Strike Plate: The strike plate is a key component in ensuring that the door locks correctly when closed. If improperly adjusted, it can cause problems with the locking mechanism.
  • Incorrectly Installed Latch: When installing the latch, you must ensure that it is installed correctly and evenly to properly calibrate the lock.
  • Improperly Aligned Hinges: When installing new hinges or replacing existing ones, they must be perfectly aligned for the door to lock properly when in the closed position.
  • Loose Door Knob: The door knob must be securely tightened for the lock to function correctly. If too loose, it can cause issues with calibration and locking mechanisms.
  • Incorrectly Programmed Codes: If you enter incorrect codes when programming your Simplisafe Smart Lock, it can throw off the calibration and prevent it from locking properly.

The good news is that these issues can be easily corrected with a few simple steps. Before attempting to calibrate your Simplisafe Smart Lock, ensure that the installation has been done correctly and that all components have been properly adjusted and aligned.

Door Knob Must Be Securely Tightened

Tools You Will Need

  • Safety Glasses
  • Electric Drill
  • Phillips Head Bit
  • Flat Head Screwdriver
  • Hammer
  • Pliers
  • Level Tool
  • Allen Wrench Set
  • Tape Measure
  • Chisel or Putty Knife

Once you have the necessary tools, it’s time to calibrate your Simplisafe Smart Lock.

Steps for Calibrating Simplisafe Smart Lock

Step 1: Inspect  the Smart Lock

Before beginning the calibration process, it is important to inspect the smart lock and ensure all its components are working properly. Check for any signs of wear or damage, and if found, contact SimpliSafe technical support.

Step 2: Connect Smart Lock to WiFi Network

To calibrate your Smart Lock, you must connect it to your home WiFi network. To do this, open the SimpliSafe app and select “Add Device”. Follow the prompts to enter your WiFi password and connect the Smart Lock to your network.

Step 3: Place Smart Lock in Calibration Mode

Connect It to Your Home Wifi Network

Once connected to your network, you must place the smart lock into calibration mode. This is done by pushing and holding the power button on the back of the lock for 5 seconds until you hear two beeps. You must now download the SimpliSafe calibration app onto your device (phone/tablet). When prompted, open the app, select “Add Device,” and enter your WiFi password.

Step 4: Follow App Instructions

Once the calibration app has been downloaded and opened, it will provide step-by-step instructions on calibrating your Smart Lock. Follow these prompts and ensure you are in a well-lit area. The app will let you know when the calibration process is complete. At this point, you should ensure the lock is calibrated accurately by testing it out on your door.

Step 5: Update Smart Lock Software

If everything is working correctly, you can now update the software for your Smart Lock. To do this, open the SimpliSafe app, select “Update Software,” and follow the prompts. After updating the software, testing the lock’s functionality is important. Open and close the door with the Smart Lock a few times to ensure everything works properly.

Step 6: Update App Settings

Once you have verified that the Smart Lock is working correctly, open the SimpliSafe app on your phone and select “Settings.” You can customize settings such as auto-lock time and doorbell notifications from there.

Remember to stay up-to-date on Smart Lock maintenance and upgrades to get the most out of your device. Open the SimpliSafe app regularly to receive updates and keep your lock functioning properly. You can enjoy your Smart Lock for years to come with regular care.

Open and Close the Door

Safety Tips for How to Calibrate Simplisafe Smart Lock

  1. Be sure to use the correct key for your lock. Contact customer support if you need help determining which key is right for your Smart Lock.
  2. Ensure there isn’t any debris or dirt in the keyhole before inserting the key into it. To clean out any debris and dirt, take a soft brush and gently sweep away any buildup inside the keyhole.
  3. Always keep your SimpliSafe Smart Lock keys in a secure place and never share them with anyone.
  4. Ensure the door knob is properly secured to ensure the lock won’t slip off when calibrating it.
  5. Be aware of any warning signs, such as incorrect or unusual sounds from the lock during calibration. If any of these signs appear, contact customer support to have them investigate the issue.
  6. Wear protective gloves and safety glasses while calibrating your SimpliSafe Smart Lock to protect yourself from any potential harm or debris that may fly around during the process.
  7. After calibrating your SimpliSafe Smart Lock, perform a test to ensure it is functioning properly. Insert the key into the lock and ensure it opens and closes as expected.

By following these safety tips, you can ensure a successful calibration of your SimpliSafe Smart Lock. It’s important always to stay safe when using locks to protect your home. If you ever need help with your Smart Lock, contact customer support for help.

Benefits of Calibrating Your Simplisafe Smart Lock?

Calibrating your Simplisafe Smart Lock is an important part of maintaining it. Here are some of the benefits you can enjoy when calibrating your lock:

  • Improved Security: Calibrating your Smart Lock helps to ensure that it is functioning correctly, ensuring that nobody can access your home without authorization.
  • Increased Convenience: A properly calibrated Smart Lock will make it easier to unlock and lock your door, making it more convenient for entering or leaving your home.
  • Longer Life Expectancy: When you perform regular calibration on your Smart Lock, it can help to extend its life span by preventing any wear and tear that could shorten its lifespan.
  • Reduced Repair Costs: Regularly calibrating your Smart Lock can reduce the amount of repairs that may be required over time. This can save you money in the long run.

Calibrating your Simplisafe Smart Lock is important to ensure it functions properly and lasts a long time. Taking the time to do so can help ensure your home remains safe and secure.

Use a Soft Cloth or Brush

Maintenance Requirements for Simplisafe Smart Lock After Calibration

It’s important to maintain the Simplisafe Smart Lock after calibration. Regular maintenance will ensure that the lock continues to function correctly and securely.

  • Check for any corrosion on the lock mechanism at least once a month. If any is present, use a soft cloth or brush to remove it before lubricating with graphite powder.
  • Lubricate the lock and all moving parts with graphite powder every three months.
  • Make sure that all screws are tightened securely. If any become loose, tighten them immediately.
  • After each maintenance session, test the key several times to ensure it functions properly.
  • Check for any signs of wear or damage and replace parts as necessary.
  • Always store the key in a secure place when not in use.
  • Change the code regularly to ensure security and minimize potential damage due to wear or tampering.
  • Regularly check the lock’s battery level and replace it if necessary.
  • Use only Simplisafe-certified personnel for any maintenance or repair work.

By following these simple steps, you can ensure that your Simplisafe Smart Lock remains in perfect condition and continues to provide maximum security. With regular maintenance, you will enjoy the convenience of a secure and reliable lock system for many years.


Calibrating your Simplisafe Smart Lock can be quite easy if you follow the steps outlined in this guide. To summarize, ensure the batteries work properly by testing them with a multimeter or replacing them as needed.

Then, change out the old door locks and install the new Simplisafe Smart Lock according to the instructions. Finally, ensure your lock is properly connected to your Simplisafe Home Security System. We hope this article about how to calibrate simplisafe smart lock has been helpful for you today.

Leave a Comment